Shark Navigator Lift-Away Professional Vacuum NV355, NV356, NV356E, NV357, NV350E Washable Post-Motor HEPA Filter; Replaces Shark Part# XHF350

Shark Navigator Lift-Away Professional Vacuum NV355, NV356, NV356E, NV357, NV350E Washable Post-Motor HEPA Filter; Replaces Shark Part# XHF350 Review

This washable and reusable replacement Post-Motor HEPA Filter fits the following shark navigator lift-away models: NV351, NV352, NV350E and also the Shark Navigator Lift-Away Professional Vacuum - Models NV355, NV356, NV356E, NV357. Manufactured by Crucial Vacuum.Directions for washing the post-motor HEPA Filter:1) Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum.2) Take out the HEPA filter by pulling it straight out.3) Turn the filter over so that the dirty side is on the bottom and vigorously tap it clean against a garbage can to remove any dust4) Wash the filter under the tap using lukewarm water with the dirty side face down until the water runs clear.DO NOT put the filter in the washing machine or dishwasher5) Allow the filter to air dry for 24 hours. Do not use a hair dryer or other heating methods to dry. 6) Once the HEPA filter is dry, replace it back into the vacuum7) Replace the cover by inserting the two